This auction ended on October 25, 2019 @ 12:00 AM EDT
Force vs. Deflection Testing
Listed By: sales
No ratings yet
View rating history and comments
Bidding only available to labs with testing facilities in the United States or Canada
Auction Description
1. We are looking into testing a flexible circuit board (approx. 185mm oal) for force versus deflection testing.
2. We are looking for forces to be applied along the circuit board centerline, and also forces perpendicular to the circuit board. The forces (perpendicular and CL) would be applied as separate tests, with separate deflections. We are not looking for combined (perpendicular and CL) forces with a combined deflection. We are looking for forces to be applied so we have deflection data between 0-1mm. With each force, we would want the corresponding deflection data.
3. We would expect the required forces to be less than 1N. and most likely in the tenths of a Newton.
4. The circuit board cross-section is estimated to be approx. 0.110mm thick x 3mm. wide.
2. We are looking for forces to be applied along the circuit board centerline, and also forces perpendicular to the circuit board. The forces (perpendicular and CL) would be applied as separate tests, with separate deflections. We are not looking for combined (perpendicular and CL) forces with a combined deflection. We are looking for forces to be applied so we have deflection data between 0-1mm. With each force, we would want the corresponding deflection data.
3. We would expect the required forces to be less than 1N. and most likely in the tenths of a Newton.
4. The circuit board cross-section is estimated to be approx. 0.110mm thick x 3mm. wide.
Auction Timeframe
|
Available for Start
On November 11, 2019 |
Required Completion
On November 29, 2019 |
CategoriesMechanical Testing
|
AccreditationsNo specific accreditations required |
Questions/Comments
No questions or comments found
