This auction ended on July 24, 2017 @ 12:00 AM EDT
IMMEDIATE DYNO TESTING - READY TO SHIP
Listed By: sales
No ratings yet
View rating history and comments
Auction Description
IMMEDIATE TESTING - READY TO SHIP MOTORS ASAP
We are looking to get two motors tested for their speed/torque curves
against power used.
Both motors are the drivers for an air compressor and the motors would be
tested while they are assembled as part of the compressors. The motors
normally run at 220 VAC, 50 Hz. and must be tested at this voltage/frequency setting.
We want to get data on the speed and torque output of the motors. They are
both approximately rated for ½ HP now but we would like to the curves at
220V/50Hz nominal ratings.
The motors will be available in approximately one week for testing. The shafts
will be located inside of the end of the compressor body but can be connected
to a dynamometer for generating the speed/torque curves along with current
and power consumed.
Please let me know if you need any additional information at this time.
WE MAY END AUCTION EARLY FOR REASONABLE OFFERS - READY SHIP TODAY.
We are looking to get two motors tested for their speed/torque curves
against power used.
Both motors are the drivers for an air compressor and the motors would be
tested while they are assembled as part of the compressors. The motors
normally run at 220 VAC, 50 Hz. and must be tested at this voltage/frequency setting.
We want to get data on the speed and torque output of the motors. They are
both approximately rated for ½ HP now but we would like to the curves at
220V/50Hz nominal ratings.
The motors will be available in approximately one week for testing. The shafts
will be located inside of the end of the compressor body but can be connected
to a dynamometer for generating the speed/torque curves along with current
and power consumed.
Please let me know if you need any additional information at this time.
WE MAY END AUCTION EARLY FOR REASONABLE OFFERS - READY SHIP TODAY.
Auction Timeframe
|
Available for Start
At auctions end |
Required Completion
On July 28, 2017 |
CategoriesElectric Motor Testing
Motor Testing
Performance Testing
|
AccreditationsNo specific accreditations required |
Questions/Comments
No questions or comments found
